Description:
“Dropping” of the paint immediately after the application, generating an a uneven film.
Possible causes:
- Application of the paint under conditions of high humidity or application with temperatures under 5°C.
- Application on a very shine or smooth surface, generating the paint recently applied has no enough adhesion.
- Application of the paint on a contaminated surface.
- Over dilution of the paint.
- The air sprayer is not in good conditions, the press is not adjusted properly or the paint was applied at low speed.
Solution:
- If you observe the sagging before the painting dries or if the painting is not in a advanced degree of dried, re-rolling or re-brushing to redistribute the excess of paint.
- If the drops of paint have already dried, sand to smooth the surface and apply a new coat of paint.
- Take into account the dilution recommended number of coats per product.
- Check environmental conditions before painting.
- Check the tools of application, especially if you are going to use air sprayer.
|
