Step 1. Paint the surface uniformly with the wished color of vinyl, applying in only one direction to make easy the leveling of the product. Allow the product to dry completely. Put masking tape at an angle of 45º in cross direction allowing a space of 10cm between strips; use the bubble level. Try getting rhombus of the same area. In this application VINILCOL verde seda was used as base coat.

Step 2. Paint uniformly with RECOL® TRANSPARENCE SPARKING. Use a synthetic brush. In order to enhance the iridescent sparks, allow the product to dry completely and then apply a second coat, alternating the direction of the application until getting the wished finish. In this application, two coats of RECOL® TRANSPARENCE SPARKING were used.