Verify, before applying the paint (Hidroplast, Recoltex, Vinilcol, Ecorecol, La Mejor) with Recol® AP-1 that there is no already fungi or algae in the surface.
If algae or fungi are already present in the surface, clean the surface with a 5% hypochlorite solution in water.
Rinse the surface and let it to dry perfectly.
Shake and then open the bag of Recol® AP-1 in one of its corners with aid of scissors or scalpel.
Pour the content of Recol® AP-1 in the paint (Hidroplast, Recoltex, Vinilcol, Ecorecol, La Mejor) according with the dosage recommended.
Mix uniformely the paint (Hidroplast, Recoltex, Vinilcol, Ecorecol, La Mejor) and Recol® AP-1 and then apply the paint using the desired technique for water base paints.
In the case you do not apply all the mixture paint and Recol® AP-1, cover up the recipient hermetically.
When use the product, make sure you use the appropriate personal protection equipment.
Dosage of Recol® AP-1
Vinyl or Stucco
Ambiances with relative humidity close to 60% and temperature around 20ºC
Ambiances with relative humidity close to 80% and temperature around 25ºC
Ambiances with relative humidity close to 95% and temperature around 30ºC
