Stir Caraplast Masitex with aid of a clean spatula.
Apply Caraplast Masitex pure with aid of spatula or trowel.
If Caraplast Masitex has very high viscosity at the moment of application, add a small amount of water and stir with aid of clean spatula.
Apply Caraplast Masitex directly with roller for texture (or another tool for textures) or if Caraplast Masitex is applied initially with trowel, pass the roller for textures (or another tool for textures) before Caraplast Masitex dries completely.
In addition to the roller for textures, you can use other tools such as brushes or comb.
The time of drying to touch of Caraplast Masitex is at least 4 hours depending on the porosity of the surface, the thickness of the film and the atmospheric conditions of temperature and humidity in the place of application.
Once Caraplast Masitex is applied, allow a hardened time of 24 hours.
During this period of time, avoid the direct contact with the water (even rain water haste).
Once you have used Caraplast Masitex, cover up hermetically the recipients, avoiding contaminations that can produce eventual deterioration of the product in storage.
Brush for textures.
First method:
Extend uniformly Caraplast Masitex on the surface with aid of trowel.
Detail the texture with aid of a brush for textures, hitting the surface until obtaining the desired finish.
Second method:
Damp the brush for textures with Carapast Masitex.
Extend Caraplast Masitex with the brush for textures.
Splash Caraplast Masitex with the brush for textures until obtaining the desired texture.
Comb.
Apply initially one coat of Caraplast Masitex with aid of a trowel.
Detail the texture with aid of a roller for textures.
Avoid retouching several times the product, because the texture tends to disappear.
Other possibility is to damp the brush for textures with Caraplast Masitex and extend uniformly the product until obtain the desired texture.
