Recol - Your Ally in Paints and Coatings

For application on Venetian Recol® Plaster, allow it to dry at least 1 to 2 hours before the application of Recol® Wax.

Once the film of Venetian Recol® Plaster is dry, sand it with sandpaper 600 or 1000 and withdraw the dust.

Shine by rubbing with force the edge of the spatula on the dry surface.

Rub the surface of Venetian Recol® Plaster with spatula or metallic plain to provide shine.

Use metallic spatula or trowel for application of Recol® Wax.

Recol® Wax is ready to apply. Do not dilute.

Apply a thin layer of Recol® Wax with metallic spatula or plain.

Take off the excess of Recol® Wax immediately.

Allow the wax to dry for at least 3 to 4 hours, or until Recol® Wax is completely dry to touch.

Rub with the edge of metallic spatula or trowel the dry film of Recol® Wax to provide shine.

Finally, rub the surface of Recol® Wax with a dry and clean piece of cloth to highlight the brilliant finish.