Recol®’s Catalyzed Sealer can be applied on any wood surface, whenever this surface is clean, dry, free of dust, dirt, grease, loose particles, contaminant agents and paint in bad condition.
Conditioning of the surface:
Repair cracks and other imperfections with fine grain stucco.
Sand the wood, eliminating the fibers that are come out.
Withdraw the dust.
Make sure you have good ventilation during the application as well as suitable atmospheric conditions: temperature above 10°C and relative humidity lower than 85%.
Stir separately Recol®’s Catalyzed Sealer and the catalyzer with aid of a clean spatula
Mix 20 parts in volume of Recol®’s Catalyzed Sealer per 1 part in volume of catalyzer, for instance: for one gallon of Recol®’s Catalyzed Sealer, use 200 c.c. of catalyzer and for one quarter of gallon Recol®’s Catalyzed Sealer, use 20 c.c. of catalyzer.
Stir uniformly the mixture Recol®’s Catalyzed Sealer and catalyzer with aid of clean spatula.
Prepare just the quantity you need because the mixture Recol®’s Catalyzed Sealer and catalyzer has 8 hours lifetime.
The application tool is the conventional air sprayer.
Make sure the tool is in good condition for use, as well as the compressor.
The product is ready to use. Do not dilute with thinner.
Apply form 2 coats of Recol®’s Catalyzed Sealer. Allow the producto to dry for at least one hour between coats. Once the coats have dried, sand with sandpaper No 260 and withdraw the dust.
For gloss finishes, apply Recol®’s Catalyzed Lacquer.
The Recol®’s Catalyzed Sealer can be mixed with Recol® Dye in order to modify the color and highlight the grains of the wood.
