Verify that the surface is porous and clean, dry, free of dust, grease, loose particles, paint in bad condition or any contaminant agent.
On painted surfaces repair with RECOL®PLASTER fissures, cracks, holes and any other imperfections that may affect the finish. Sand the area to apply in order to get an even surface; paint with VINILCOL for interior ambiances. It is advisable to use one color of RECOL® ELEGANCE that combines with the color of the paint used as base coat. In the samples shown VINILCOL Almond was used.

The drying time between coats is about one hour. Make sure the surface is completely dry before applying additional coats of RECOL® ELEGANCE, because wet surfaces can make more difficult the application and may damage the appearance of the finish.

The tools used for the application are roller, air sprayer, spatula and masking tape.
It is advisable to practice the technique on a table or top before start the application in order to see the combination of colors between the base coat and the color of RECOL® ELEGANCE.