Verify that the surface is porous and clean, dry, free of dust, grease, loose particles, paint in bad condition or any contaminant agent.

Correct the bigger imperfections of the surface such as holes, cracks or paint in bad condition before proceeding to apply. Correct light imperfections and smooth the surface with RECOL® PLASTER. It is advisable to seal the surface initially with RECOL® CRYL to improve the leveling of the finish.

The drying time between coats is about one hour. Make sure the surface is completely dry before applying additional coats of RECOL® METALLIC, because wet surfaces can make more difficult the application and may damage the appearance of the finish.
The tools used for the application are brush, spatula, rule, masking tape and protective plastic gloves.